Analisis Perhitungan Dan Perbaikan Tingkat Produktivitas Pada Area Servis Tabung Gas Menggunakan OMAX
Keywords:
Objective Matrix (OMAX), Produktivitas, Fishbone DiagramAbstract
Abstract
Productivity Productivity is an important factor to support company sustainability. This can be known by analyzing and evaluating output based on the level of work performance during a certain period. PT Petrogas Prima Services is a limited liability company which operates in the field of repair and maintenance services for 3kg LPG gas cylinders. PT Petrogas Prima Servis offers services such as Reset, Repair and Repaint. The entire gas cylinder servicing process is carried out according to the Standard Operating Procedure (SOP) in collaboration with PT. Pertamina (Persero). With distribution management, professional collaboration, and well-controlled and programmed service methods. Productivity measurement is carried out using the Objective Matrix (OMAX) method. The problem that occurs at PT Petrogas Prima Servis is in the gas cylinder service area. This is known to be due to the decline in service results in 2021 with the total results obtained being 933,089 3Kg LPG gas cylinders. Meanwhile, the planning target that must be met in one year is 1,060,328 3Kg LPG gas cylinders. This caused the service yield rate for gas cylinders to decrease by 13.6% or the equivalent of 127,239 gas cylinders. This causes less stability in the gas cylinder service performance process. It is necessary to measure productivity levels to find out what and how causes the lack of decreased gas cylinder service results. The problem identification method uses the Fishbone Diagram and 5W-1H. This method is to find out the causes of decreased productivity in the gas cylinder service area department. These factors are caused by the workforce and work environment. Meanwhile, from the results of calculating the achievement score for each ratio, it is known that the lowest value is ratio 3, namely Labor Effectiveness with a score of 46 with an average of 3.38 which can be seen from the period July to December. The level of significant decline in the value of the productivity index starting from July 193% to September 83%, it can be seen that the decline in the productivity value index reached 110%. This causes a very significant reduction in the number of gas cylinder service output results.
Keywords: Objective Matrix (OMAX), Productivity, Fishbone Diagram.
Downloads
References
A|nwa|r, Sya|rifuddin, Devi Sri Deza| Kurnia|, Usula|n Peningka|ta|n Produktivita|s Mengguna|ka|n Metode Objective Ma|trix ( OMA|X ) Pa|da| PT. Perkebuna|n Lemba|h A|ceh Singkil, Jurna|l online Universita|s Ma|likussa|leh, A|ceh Singkil, 2017.
A|via|nda|, Dea|, Yunia|r, Yunia|ti Yoa|nita|, Stra|tegi Peningka|ta|n Produktivita|s di La|nta|i Produksi Mengguna|ka|n Metode Objective Ma|trix ( OMA|X ), Jurna|l Online Institut Teknologi Na|siona|l, no.04,Vol.01, Ba|ndung, 2014.
Ervil, Riko dkk, Buku Pa|ndua|n Penulisa|n da|n Ujia|n Skripsi, STTIND Pa|da|ng, Pa|da|ng, 2015.
Ga|spersz, Vincent, Ma|na|jemen Produktivita|s Tota|l, Gra|media| Pusta|ka| Uta|ma|, Ja|ka|rta|, 2000.
Ha|di, Yuswono, Wa|rdoyo Priskila| Putri Peningka|ta|n Produktivita|s UMKM Mengguna|ka|n Metode Objective Ma|trix (OMA|X), Jurna|l Online Universita|s Ma| Chua|ng, No.1, Vol.4, Ma|la|ng, 2016.
Leona|rd , K da|n Wa|hyu, M, A|na|lisa| Produktivita|s denga|n Metode Objective Ma|trix (OMA|X) pa|da| Ba|gia|n Produksi Potong (Cutting) PT X, Jurna|l Metris vol 1, no 1, pp. 41-48, 2010.
Na|rbuko, Cholid, dkk. Metodologi Penelitia|n, Bumi A|ksa|ra|,2009
Na|sution, A|rma|n Ha|kim, Ma|na|jemen Industri, A|ndi Offset, Yogya|ka|rta|, 2006.
Na|rbuko, Cholid, A|chma|di, Metodologi Penelitia|n, Bumi A|ksa|ra|, Ja|ka|rta| 2009.
Nova|, A|ulia| Sri dha|rma|, Penera|pa|n Motode Objective Ma|trix (OMA|X) da|la|m menga|na|lisis produktivita|s di PT. Nusa|nta|ra| Beta| Fa|rma| Pa|da|ng, Skripsi, Pa|da|ng, 2017.
Summa|nth, D.J, Productivity Engineering a|nd Ma|na|gement, McGra|w-Hill Book Compa|ny, 1984.
Sa|tria|, Wa|hyu, Pengukura|n Produktivita|s Berba|sis Metode Objective Ma|trix (OMA|X) da|n A|na|lytica|l Hiera|rchy Process (A|HP) (studi ka|sus Divisi Cold Rolling Mill (CRM) PT Kra|ka|ta|u Steel (Persero) Tbk, Universita|s A|nda|la|s, Pa|da|ng, 2015.
DJ Suma|nth 1984 Productivity Engineering a|nd Ma|na|gement (New York: McGra|wHill Book Compa|ny)
Riggs JL 1987 Production system pla|nning, a|na|lysis, a|nd control (Willey: Singa|pore).
Wina|rni 2013 A|na|lysis of Mea|surement of Productivity Using the Mundel a|nd A|PC Models (A|na|lisis Pengukura|n Produktifita|s Denga|n Mengguna|ka|n Model Mundel Da|n A|PC)
Wa|hyuni HC, Setia|wa|n 2016 Implementa|tion of Objective Ma|trix (OMA|X) Method for Productivity Mea|surement a|t PT .A|BC. E. ISSN. 2541-5115 (Implementa|si Metode Objective Ma|trix (OMA|X) Untuk Pengukura|n Produktivita|s Pa|da| PT.A|BC. E. ISSN. 25415115
FitriA|gustina|, Nina| A|ris Ria|na| 2011 Productivity A|na|lysis with Objective Ma|trix (OMA|X) Method a|t PT. X (A|na|lisis Produktivita|s denga|n Metode Objective Ma|trix (OMA|X) di PT.X)
Mukha|rroma|h IN, Deora|nto,Musta|niroh, Sita| 2017 A|na|lysis of mea|surement of compa|ny performa|nce using the Green Supply Cha|in Ma|na|gement (GSCM) method in the bla|ck tea| business unit (A|na|lisis pengukura|n kinerja| perusa|ha|a|n denga|n metode Green Supply Cha|in Ma|na|gement (GSCM) di unit bisnis teh hita|m)
A|lifa|tul Fitriya|h, Uma|r Wiwi 2015 A|na|lysis of A|chievement of Productivity Increa|sed Use of Welding Ma|chines Using OMA|X Models a|t PT. Dock a|nd Shipping Sura|ba|ya| (A|na|lisa| Penca|pa|ia|n Peningka|ta|n Produktivita|s Pengguna|a|n Mesin La|s Denga|n Mengguna|ka|n Model OMA|X Di PT. Dok Da|n Perka|pa|la|n Sura|ba|ya|).
Lisa| Jo Rudy, (Get Sta|rted With Ca|use a|nd Effect A|na|lysis Using a| Fishbone Cha|rt.) Tera|khir di modifika|si pa|da| 16 September 2021 https://business.tutsplus.com/a|rticles/get-sta|rted-with-ca|use-a|nd-effect-a|na|lysis-using-a|-fishbone-cha|rt--cms-21178
