Utilization Of Iot Technology In An Automated Fertilizetion System To Improve Efficiency And Productivity Of Tobacco Plants
DOI:
https://doi.org/10.55537/cosie.v3i4.933Keywords:
Keywords: Tobacco, IoT, Automatic Fertilization, NodeMCU ESP8266, PrototypingAbstract
The plantation crop called tobacco is the main component needed to make cigarettes. The development and quality of tobacco plants are highly dependent on environmental factors, including sufficient soil moisture and adequate nutrition. Excessive soil moisture and lack of nutrients can cause plants to wither and die, so an IoT-based automatic fertilization system is needed. This research designs an automatic fertilization system that utilizes the NodeMCU ESP8266 integrated with the Blynk application. Soil Moistute sensor is used to measure or detect soil moisture content, RTC is used for scheduling fertilization, and Relay is used to turn on the pump automatically. Prototyping method is applied in this system, starting from requirement gathering to final evaluation. The system succeeded in increasing the efficiency and productivity of tobacco plants, as well as providing convenience for farmers in managing fertilization and watering automatically
Downloads
References
N. J. Geraldi Rhamadhany, “Rancang Bangun Prototipe Sistem Monitoring Pemupukan Dan Penyiraman Tanaman Otomatis Berbasis Internet Og Things,” Technol. Informtion Commun., vol. 11, pp. 86–92, 2023.
Dinas Pertanian dan Perkebunan Provinsi NTB, “Rekapitulasi Produksi, Luas Panen, dan Produktivitas Tembakau Rakyat di Provinsi NTB,” Dinas Pertanian dan Perkebunan Provinsi NTB, 2023. https://data.ntbprov.go.id/dataset/rekapitulasi-produksi-luas-panen-dan-produktivitas-tembakau-rakyat-di-provinsi-ntb (accessed Jul. 30, 2024).
T. Nur Azizah, “Jurnal Vocational Teknik Elektronika dan Informatika Penyiraman dan Pemupukan Tanaman Bawang Merah Secara Otomatis Pada Greenhouse Menggunakan Internet of Things (IoT),” J. Vocat. Tek. Elektron. dan Inform., vol. Vol.9, no. 4, p. Hal 1-11, 2021, [Online]. Available: http://ejournal.unp.ac.id/index.php/voteknika/index
S. Nurhalimah, A. M. Yusa, and A. Fahmi, “Rancang Bangun Sistem Monitoring KelembapanTanah dengan Konsep Smart Farming untuk Budidaya Tanaman Cabai Rawit Berbasis Internet of Things (IOT),” Softw. Dev. Digit. Bus. Intell. Comput. Eng., vol. 1, no. 02, pp. 49–54, 2023, doi: 10.57203/session.v1i02.2023.40-54.
R. Sarwansah, U. Jaelani, A. Hasad, S. Supratno, and Sugeng, “Aplikasi NodeMCU ESP8266 Untuk Monitoring Kelembaban Tanah Berbasis Internet of Things,” J. Students‘ Res. Comput. Sci., vol. 3, no. 1, pp. 63–72, 2022, doi: 10.31599/jsrcs.v3i1.1174.
V. S. Windyasari and P. A. Bagindo, “Rancang Bangun Alat Penyiraman Dan Pemupukan Tanaman Secara Otomatis Dengan Sistem Monitoring Berbasis Internet Of Things,” Pros. Semin. Nas. Univ. Indones. Timur, vol. 1, no. 1, pp. 151–171, 2019, [Online]. Available: https://uit.e-journal.id/SemNas/article/view/693
R. P. T. Surya, B. Muhamad, “Penyiraman dan Pemupukan Tanaman Bawang Merah Secara Otomatis Pada Greenhouse Menggunakan Internet Of Things (IoT),” vol. 2, pp. 1–11, 2022.
A. M. I. Adikara, “Rancang Alat Penyiraman dan Pemupukan Tanaman Berbasis IoT,” vol. 2, pp. 23–30, 2023.
M. Fathurrohman, Tio Prasetiya, lin, “Sistem Monitoring Penyiraman Otomatis Berbasis IoT Menggunakan Soil Moisture Pada Tanaman Melon,” J. Mhs. Tek. Inform., vol. 8, no. 1, pp. 568–573, 2024.
A. Sinaga and Aswardi, “Rancangan Alat Penyiram Dan Pemupukan Tanaman Otomatis Menggunakan Rtc Dan Soil Moisture Sensor Berbasis Arduino,” JTEIN J. Tek. Elektro Indones., vol. 1, no. 2, pp. 150–157, 2020, doi: 10.24036/jtein.v1i2.60.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Ayuni, Lalu Delsi Samsumar, Zaenudin, Ahmad Subki, Ardiyallah Akbar
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
