Web-Based Intelligent Tutoring System On Students Achievement And Interest In Technical Drawing In Niger State
DOI:
https://doi.org/10.55537/jistr.v2i1.527Keywords:
Technical drawing, Web-based intelligent tutoring system, Achievement & InterestAbstract
The study examines how a web-based innovative coaching system affects students' performance and interest in technical drawing in Niger, Nigeria. The hypotheses created in answer to the two study questions are evaluated using the A.05 significance threshold. The investigation was conducted utilizing a pre-post non-equivalent control group quasi-experimental study design. The study's participants comprised 428 National Technical College (NTC) II, students. The sample size for this study was 180 students, of whom 68 were in the experimental group, and 112 were in the control group. The experimental group employed Simple Random Sampling (SRS) and intentional sampling techniques. The instruments used to gather data are the Technical Drawing Achievement Test (TDAT) and the Technical Drawing Interest Inventory (TDII). The reliability coefficient for TDAT is 0.77, whereas the reliability coefficient for TDII is 0.79 using the Pearson Product Moment Correlation coefficient. The mean was used to answer research questions, and ANCOVA was used to evaluate the hypotheses. The study's findings demonstrated that web-based intelligent tutoring solutions are more successful in raising student achievement and piquing their interest in technical drawing than traditional teaching techniques. It was suggested that professors, particularly those teaching technical drawing, employ a web-based intelligent tutoring system for technical college students to enhance students' academic performance and pique their interest in technical drawing.
References
A. Ralf, “A Tutorial of How to Ensure High Automotive Microcontroller Quality,” in Proceedings of the European Test Workshop, 2021, vol. 2021-May. doi: 10.1109/ETS50041.2021.9465379.
Z. Tsiviltidou and G. Vavoula, “Digital Storytelling as a Framework for Inquiry-Based Museum Learning,” 2017. doi: 10.1109/ICALT.2017.50.
X. Ma, Y. Li, R. Liu, Y. Zhang, L. Ma, and Z. Gao, “Frequent itemsets mining of SCADA data based on FP-growth algorithm,” 2020. doi: 10.1109/EI250167.2020.9346885.
W. Yun, Z. Lu, K. Feng, X. Jiang, P. Wang, and L. Li, “Two Efficient AK-Based Global Reliability Sensitivity Methods by Elaborative Combination of Bayes’ Theorem and the Law of Total Expectation in the Successive Intervals without Overlapping,” IEEE Trans. Reliab., vol. 69, no. 1, 2020, doi: 10.1109/TR.2019.2895866.
J. Ming, Z. Jianqiu, M. Bilal, U. Akram, and M. Fan, “How social presence influences impulse buying behavior in live streaming commerce? The role of S-O-R theory,” Int. J. Web Inf. Syst., vol. 17, no. 4, 2021, doi: 10.1108/IJWIS-02-2021-0012.
J. Kim, M. Lorenz, S. Knopp, and P. Klimant, “Industrial Augmented Reality: Concepts and User Interface Designs for Augmented Reality Maintenance Worker Support Systems,” 2020. doi: 10.1109/ISMAR-Adjunct51615.2020.00032.
A. B. Araojo, “Workshop-drawing equirectangular perspectives for VR panoramas with Eq A sketch 360,” 2021. doi: 10.23919/iLRN52045.2021.9459397.
X. Chen and D. Wang, “Project for ‘part drawing’ teaching,” 2018. doi: 10.1109/ICMCCE.2018.00142.
W. Shen, Z. Lin, and H. Wang, “The application of ranking task in mechanical engineering drawing teaching strategy,” 2020. doi: 10.1109/LWMOOCS50143.2020.9234314.
A. Ikhwan, A. B. Nasution, and M. Badri, “Active Presenter : Making Videos as Learning Media,” vol. 1, no. April, pp. 1–7, 2022.
M. Mukhtar and M. Munawir, “Aplikasi Decision Support System (DSS) dengan Metode Fuzzy Multiple Attribute Decission Making (FMADM) Studi Kasus : AMIK Indonesia Dan STMIK Indonesia,” J. JTIK (Jurnal Teknol. Inf. dan Komunikasi), vol. 2, no. 1, p. 57, Oct. 2018, doi: 10.35870/jtik.v2i1.54.
H. Wu and Y. Qi, “Application of Computer Software Processing Technology in Performance Information Management System,” 2021. doi: 10.1109/IWCMC51323.2021.9498597.
M. Naomi, H. Noprisson, F. I. Komputer, U. Mercu, and B. Jakarta, “Analisa Dan Perancangan Sistem Pengaduan Mahasiswa Berbasis Web ( Studi Kasus : Universitas Mercu Buana Kranggan ) Pendahuluan Landasan Teori,” JUSIBI (Jurnal Sist. Inf. Dan E-Bisnis, vol. 1, no. 5, pp. 185–193, 2019.
L. Picinali, “3D Tune-In: 3D-Games for Tuning and Learning About Hearing Aids,” 2018. doi: 10.1109/vr.2018.8446298.
S. Fuada, “Incident management of information technology in the indonesia higher education based on COBIT framework: A review,” EAI Endorsed Trans. Energy Web, vol. 19, no. 22, 2019, doi: 10.4108/eai.13-7-2018.156387.
T. N. Utami, R. Sayekti, and T. Santi, “The Impact of Light Intensity on the Subjective Complaints of Librarians and Users: an Investigation of an Academic Library,” Libr. Philos. Pract., vol. 2021, 2021.
I. K. Raharjana, I. Ibadillah, Purbandini, and E. Hariyanti, “Incident and service request management for academic information system based on COBIT,” in International Conference on Electrical Engineering, Computer Science and Informatics (EECSI), 2018, vol. 2018-October. doi: 10.1109/EECSI.2018.8752792.
T. Yue, Y. Li, and Z. Hu, “Dwsa: An intelligent document structural analysis model for information extraction and data mining,” Electron., vol. 10, no. 19, 2021, doi: 10.3390/electronics10192443.
A. Agnes Lydia and F. Sagayaraj Francis, “Convolutional neural network with an optimized backpropagation technique,” 2019. doi: 10.1109/ICSCAN.2019.8878719.
A. Z. Sampaio, “Historical evolution of technical drawing in engineering,” 2018. doi: 10.1109/CISPEE.2018.8593496.
R. T. T. Putro, “Drawing as a basic ability of design students in thinking visual and understanding of form logic,” 2019. doi: 10.1109/ECTI-CON47248.2019.8955203.
M. Hamdani, M. Taki, M. Rahnama, A. Rohani, and M. Rahmati-Joneidabad, “Prediction the inside variables of even-span glass greenhouse with special structure by artificial neural network (MLP-RBF) models,” J. Agric. Mach., vol. 10, no. 2, 2020.
M. Badri, A. Ikhwan, and R. A. Putri, “IMPLEMENTASI AUGMENTED REALITY PADA MEDIA PENGENALAN,” vol. 7, no. 2, pp. 109–121, 2022.
A. Setiawan, Soeheri, E. Panggabean, M. A. Elhias, F. Ikorasaki, and B. Riski, “Efficiency of Bayes Theorem in Detecting Early Symptoms of Avian Diseases,” 2019. doi: 10.1109/CITSM.2018.8674273.
T. Williams and R. C. Leishman, “Validation of Doppler Lidar Sensor using Covariance Analysis,” in Proceedings of the IEEE National Aerospace Electronics Conference, NAECON, 2021, vol. 2021-August. doi: 10.1109/NAECON49338.2021.9696418.
Q. Li, Y. Fan, H. Xu, X. Liang, and J. Yan, “A New Approach for Nonlinear Transformation of Means and Covariances in Direct Statistical Analysis of Nonlinear Systems,” IEEE Access, vol. 9, 2021, doi: 10.1109/ACCESS.2021.3083185.
H. Sawada, R. Ikeshita, and T. Nakatani, “Experimental analysis of em and mu algorithms for optimizing full-rank spatial covariance model,” in European Signal Processing Conference, 2021, vol. 2021-January. doi: 10.23919/Eusipco47968.2020.9287336.
C. H. Kang, S. Y. Kim, and J. W. Song, “Data Fusion with Inverse Covariance Intersection for Prior Covariance Estimation of the Particle Flow Filter,” IEEE Access, vol. 8, 2020, doi: 10.1109/ACCESS.2020.3041928.
Downloads
Published
Issue
Section
License
Copyright (c) 2023 Abdullahi Muhammad Hassan, Usman, Bala, Mannir, Karfe
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
